How to change Splash screen and Screen Saver Logo's (A/C Only)
How to change Splash screen and Screen Saver Logo's (A/C Only)
Sizes:
|
Series
|
Splash
|
Screen
Saver
|
|
KP-4016
|
576 x
90
|
192 x
60
|
|
KP-5032
|
576 x
90
|
192 x
130
|
|
ODIN/OMS
|
576 x90
|
576 x
90
|
- Formats: BMP, JPG, TIF, GIF,
PNG
- The unit centers the picture
and fills the rest of the screen with the color of the pixel in the top
left corner.
Related Articles
How to Run the bootloader of a Key Panel
How to Run the bootloader of a Key Panel To run the bootloader, do the following: 1. Power off the keypanel. 2. Verify the KP-5032/4016 is powered off, but still connected to the FRAME. 3. At the same time, press and hold keypanel key 15 in the ...
How to get and apply a License on a Keypanel
How to get and apply a License on a Keypanel Get the MAC address 1. To get the MAC address of the Key panel, enter the menu with the “MENU” button. 2. Select “Display” and press “SEL” 3. Select “MAC Address” and press “SEL” 4. Write down this MAC ...
Authentication bypass on OMS
Authentication bypass on OMS Push and hold ENC1, the encoder left of the display, while resetting the unit with a paperclip in the front panel hole or performing a power cycle. Release ENC1 when you see the splash screen. (pressing CLR while booting ...
How to Un-enroll a unit from DDM
How to Un-enroll a unit from DDM If a key panel was enrolled in DANTE Domain Manager you can un-enroll it without having access to the network where it was connected with DDM. You can easily recognize an enrolled panel, it will not accept any change ...
Correct the Vlink installation
Correct the Vlink installation To correct the Vlink installation that is incorrectly of SIP and needs to change to Vlink Matrix, please follow these steps: uninstall VLINK from your computer. You can do this by going into Control Panel > Program and ...